350-601: Implementing and Operating Cisco Data Center Core Technologies (DCCOR) Part 3
Question #: 121
Topic #: 1
Due to a domain name change at a customer site, a Cisco UCS cluster must be renamed. An engineer must recommend a solution to ensure that the Cisco UCS
Manager is available over HTTPS.
Which action accomplishes this goal?
A. Regenerate the default key ring certificate manually
B. Reinstall the cluster to generate the default key ring certificate
C. Reboot the SSO component of the Cisco UCS Manager
D. Generate a new default key ring certificate from the Cisco UCS Manager
Selected Answer: A
Question #: 122
Topic #: 1
An engineer needs to make an XML backup of Cisco UCS Manager. The backup should be transferred using an authenticated and encrypted tunnel, and it should contain all system and service profiles configuration. Which command must be implemented to meet these requirements?
A. copy running-config scp://user@host35/backups/all-config9.bak all-configuration
B. create backup scp://user@host35/backups/all-config9.bak all-configuration
C. create file scp://user@host35/backups/all-config9.bak all-configuration
D. copy startup-config scp://user@host35/backups/all-config9.bak all-configuration
Selected Answer: B
Question #: 123
Topic #: 1
A network architect considers a Cisco HyperFlex design solution for a company. The proposed solution is for a virtual environment that is not performance- sensitive, but the solution must have high storage capacity and a low cost. Which Cisco HyperFlex storage configuration should be used?
A. Hybrid
B. All-SAN
C. All-NVMe
D. All-Flash
Selected Answer: A
Question #: 124
Topic #: 1
An engineer needs to perform a backup of user roles and locales from Cisco UCS Manager to replicate the setting to a different fabric interconnect. The engineer wants to review the file before importing it to a target fabric interconnect. Which backup type must be selected to meet these requirements?
A. logical configuration
B. full state
C. system configuration
D. all configuration
Selected Answer: C
Question #: 125
Topic #: 1
An engineer creates a service profile in Cisco UCS Manager and must assign a policy that reboots blades when changes are applied. The changes must be applied only after user acknowledgment. Which two policies must be configured to meet these requirements? (Choose two.)
A. Reboot Policy
B. Boot Policy
C. Power Control Policy
D. Global Policy
E. Maintenance Policy
Selected Answer: AE
Question #: 126
Topic #: 1
A network engineer plans to upgrade the firmware of a Cisco UCS B-Series chassis by using the Auto Install feature. Which component is upgraded during the infrastructure firmware upgrade stage?
A. Adapter
B. Cisco IMC
C. I/O Modules
D. BIOS
Selected Answer: C
Question #: 127
Topic #: 1
An engineer must build a lab replica of a Cisco UCS production environment. The file must be imported into a new Cisco UCS cluster using a Cisco UCS Manager
GUI. The file must be in XML format and be exported from Cisco UCS Manager using an encrypted method. Which two configuration parameters should be selected to meet these requirements? (Choose two.)
A. Type: Full state
B. Type: Logical configuration
C. Protocol: TFTP
D. Type: All configuration
E. Protocol: SCP
Selected Answer: DE
Question #: 128
Topic #: 1
A Cisco UCS user called `Employee1` accidentally changed the boot policy of the Cisco UCS server at the Cisco UCS Manager root level. This change impacted all service profiles, and their storage connectivity was lost. The system administrator wants to prevent this issue from recurring in the future. The new security policy mandates that access must be restricted up to the organization level and prevent other users from modifying root policies. Which action must be taken to meet these requirements?
A. Modify the privilege level assigned to the user
B. Assign users to a specific Cisco UCS locale
C. Assign the user ג€Employee1ג€ the network-operator role
D. Define a custom user role and assign it to users
Selected Answer: B
Question #: 129
Topic #: 1
A new employee must be granted access to add VLANs into an existing Cisco UCS Manager and configure NTP synchronization with date and time zone settings.
Which two privileges must be granted to the employee to complete the task? (Choose two.)
A. Service Profile Compute (ls-compute)
B. Ext LAN Policy (ext-lan-policy)
C. Service Profile Network Policy (ls-network-policy)
D. Service Profile Config (ls-config)
E. Ext LAN Config (ext-lan-security)
Selected Answer: BE
Question #: 130
Topic #: 1
Refer to the exhibits. ESXi-Server is associated to the blade server. A VLAN is added to Trunk-A. The VLAN is missing on the vNIC of ESXi-Server. Which action should be taken to add the VLAN to the vNIC?
A. Change the template type of Trunk-A to an updating template.
B. Remove the VLAN from the Trunk-A template and add the VLAN again.
C. Change the template type of ESXi-Server to an updating template.
D. Remove both templates and recreate them as updating templates.
Selected Answer: A
Question #: 131
Topic #: 1
A network engineer is deploying a Cisco All-Flash HyperFlex solution. Which local storage configuration is required for the operating system and persistent logging?
A. one solid state drive
B. two SATA drives
C. one SATA drive
D. two solid state drives
Selected Answer: D
Question #: 132
Topic #: 1
DRAG DROP –
Drag and drop the fields for configuring a full state backup file of the Cisco UCS Manager from the left onto the descriptions on the right.
Select and Place:
Suggestion Answer:
Question #: 133
Topic #: 1
An engineer configures an Intersight Virtual Appliance and must claim over 200 targets. The engineer starts the Claim New Target Procedure. The engineer has prepared this initial comma-separated value file to provision the targets:
UCSFI,10.1.1.3,user-1,pwd5516b917
IMC,10.1.1.5/26,user-2,pwdc65b1c43f
HX,10.1.2.1/30,user-3,pwd39913690
UCSD,1.1.1.1.user-4,pwd5003e9d5 –
Which information must be included in the comma-separated value file to provision the targets?
A. target type, hostname or IP address, user name, password
B. location, address, name, password
C. FQDN, AD name, IP address, email
D. certificate, user name, password, email
Selected Answer: A
Question #: 134
Topic #: 1
Which component is disrupted when the Cisco Integrated Management Controller is upgraded on a Cisco UCS Series Server?
A. SAN traffic
B. Cisco UCS Manager
C. KVM sessions
D. data traffic
Selected Answer: C
Question #: 135
Topic #: 1
Which two configuration settings are available in the Cisco UCS Firmware Auto Sync Server policy? (Choose two.)
A. Immediate Action
B. User Notification
C. User Acknowledge
D. Delayed Action
E. No Action
Selected Answer: CE
Question #: 136
Topic #: 1
A Cisco Nexus 9000 Series Switch experiences a startup configuration corruption. The engineer must implement a procedure to recover the backup configuration file from the switch. Which command set must be used?
A. 1. Clear the current configuration of the switch 2. Restart the device 3. Copy a previously saved configuration file to the running-configuration 4. Copy the running-configuration to the startup configuration
B. 1. Clear the current configuration of the switch 2. Restart the device 3. Copy the running configuration to the startup configuration 4. Copy a previously saved configuration file to the running configuration
C. 1. Copy the running-configuration to the startup configuration 2. Clear the current configuration of the switch 3. Restart the device 4. Copy a previously saved configuration file to the running configuration
D. 1. Restart the device 2. Copy the running-configuration file to a remote server 3. Clear the current configuration of the switch 4. Copy the running configuration to the startup configuration
Selected Answer: A
Question #: 137
Topic #: 1
An engineer configures the properties of a Cisco UCS Cisco Integrated Management Controller network adapter for a standalone Cisco C-Series Server. The
Failback Timeout in the vNIC was set to 600. When the failure occurs, the secondary interfaces must be used and then failback when the primary interface becomes available again. Which action must be taken to meet these requirements?
A. Set default VLAN on the adapters.
B. Increase CoS to 6.
C. Enable Uplink Failover.
D. Disable VNTAG mode.
Selected Answer: C
Question #: 138
Topic #: 1
An engineer must perform a backup operation of the Cisco UCS system. The backup must be transferred to a secure location using UDP and must contain information about VLANs, VSANs, and other policies. Also, the operations team requires the backup file to be in a human-readable format. Which configuration set meets these requirements?
A. Type: All configuration Protocol: FTP
B. Type: Full state Protocol: SFTP
C. Type: Logical configuration Protocol: TFTP
D. Type: System configuration Protocol: SCP
Selected Answer: C
Question #: 139
Topic #: 1
When deploying a Cisco HyperFlex edge with a pair of switches, what is the minimum number of interfaces in trunk mode required on each HX node?
A. 1
B. 2
C. 4
D. 6
Selected Answer: B
Question #: 140
Topic #: 1
What is a benefit of independent resource scaling in Cisco HyperFlex hybrid architecture?
A. remote booting of converged servers
B. flexible expansion of compute, caching, and capacity
C. multivendor converged node hardware support
D. support for compute nodes with third-party storage
Selected Answer: B
Question #: 141
Topic #: 1
Which method must a network engineer use to upgrade the BIOS firmware or a Cisco UCS standalone C-Series rack-mount server?
A. Use the U-ACPI Interface.
B. Use the Cisco host upgrade utility.
C. Use the Cisco hardware upgrade utility.
D. Use the Cisco host firmware policy.
Selected Answer: B
Question #: 142
Topic #: 1
An engineer must configure the order in which the server attempts to boot from available boot device types using Cisco Integrated Management Controller (Cisco
IMC). The engineer must change the boot order configuration during the setup and apply the new requirements multiple times. The requirement is to change the
Cisco IMC actual boot order so it is different from the configured boot order. Which setting accomplishes this goal?
A. Enable the system to boot with the configured boot order.
B. Set the boot configuration directly through BIOS.
C. Apply UEFI Secure Boot for a nonsupported operating system.
D. Configure the legacy and precision boot order to be mutually exclusive.
Selected Answer: B
Question #: 143
Topic #: 1
In an FCoE environment, for which two sets of data must an interface that implements the PAUSE mechanism always provision sufficient ingress buffer? (Choose two.)
A. frames that were sent with high credit
B. frames that were sent on the link but not yet received
C. frames that were processed and transmitted by the transmitter after the PAUSE frame left the sender
D. frames that were processed and transmitted by the transmitter before the PAUSE frame left the sender
E. frames that were sent on the link and received
Selected Answer: BD
Question #: 144
Topic #: 1
What are two types of FC/FCoE oversubscription ratios? (Choose two.)
A. switch processing power to end-node processing power
B. port bandwidth to uplink bandwidth
C. server storage to end-node count
D. edge ISL bandwidth to core ISL bandwidth
E. host bandwidth to storage bandwidth
Selected Answer: BD
Question #: 145
Topic #: 1
DRAG DROP –
Drag and drop the characteristics from the left onto the correct storage systems on the right.
Select and Place:
Suggestion Answer:
Question #: 146
Topic #: 1
Refer to the exhibit.
An engineer is implementing zoning on two Cisco MDS switches. After the implementation is finished, E Ports that connect the two Cisco MDS switches become isolated.
What is wrong with the implementation?
A. Zones are local to the MDS switch and name service must be used to activate the connection between E Ports.
B. Different zone set names must be configured on both MDS switches.
C. Zones must have the same name on both MDS switches for the E Ports to function.
D. E Ports on both MDS switches must be configured as F Ports for the zoning to function.
Selected Answer: C
Question #: 147
Topic #: 1
An engineer is implementing FCoE.
Which aspect of DCBXP on a Cisco Nexus switch affects this implementation?
A. It requires that LLDP transmit and LLDP receive are enabled on the FCoE interface.
B. It uses the Cisco Fabric Services protocol to exchange parameters between two peer links.
C. It provides the authentication of peers on the Cisco Nexus switch.
D. It always is enabled on 10/100-Mbps native Ethernet ports.
Selected Answer: A
Question #: 148
Topic #: 1
Which product includes prebuilt templates that are available to be used to customize fabric deployments?
A. Cisco Tetration
B. Cisco Data Center Network Manager
C. Cisco ACI
D. Cisco UCS Manager
Selected Answer: B
Question #: 149
Topic #: 1
Which statement describes the MAC address that the FCoE Initialization Protocol chooses for use by an E-Node in an FCoE implementation?
A. The FCoE Initialization Protocol uses a 24-bit FC-MAP and concatenates a 24-bit Fibre Channel ID to create a fabric-provided MAC address.
B. The FCoE Initialization Protocol uses the burned-in MAC address of the converged network adapter for all FCoE operations.
C. FCoE does not use a MAC address. The FCoE Initialization Protocol is used to acquire a Fibre Channel ID, and the address is used for all FCoE communications in the same way as Fibre Channel Protocol.
D. The FCoE Initialization Protocol uses 01.00.0C as the first 24 bits of the MAC address and appends a 24-bit Fibre Channel ID to derive a full 48-bit FCoE MAC address.
Selected Answer: A
Question #: 150
Topic #: 1
Which statement describes monitoring Fibre Channel traffic on a Cisco UCS 6332 Fabric Interconnect?
A. Fibre Channel traffic is monitored only on one vHBA per server.
B. Fibre Channel traffic is capable to be monitored as it is encapsulated as FCoE.
C. The monitoring of Fibre Channel traffic is limited to the default VSAN.
D. The destination port for monitoring must be an unassigned Fibre Channel port.
Selected Answer: B
Question #: 151
Topic #: 1
An engineer is implementing NPV mode on a Cisco MDS 9000 Series Switch.
Which action must be taken?
A. NPIV must be enabled on the upstream switch.
B. The FCNS database must be disabled in the fabric.
C. A port channel must be configured to the upstream switch.
D. All switches in the fabric must be Cisco MDS switches.
Selected Answer: A
Question #: 152
Topic #: 1
Which two statements describe modifying Cisco UCS user accounts? (Choose two.)
A. Disabling a user account maintains all of the data in the Cisco UCS Fabric Interconnect.
B. The admin account is used only to log on by using SSH.
C. The password of the user account must contain a minimum of 10 characters.
D. Local user accounts override the same account on a remote authentication server, such as TACACS, RADIUS, or LDAP.
E. The password of the user account expires in 30 days.
Selected Answer: AD
Question #: 153
Topic #: 1
An engineer must ensure fabric redundancy when implementing NPV mode on a Cisco MDS 9000 Series Switch.
Which action enables fabric redundancy?
A. Use TE ports to connect to upstream switches.
B. Add a port channel to upstream switches.
C. Configure the NPV devices to use an external FLOGI database.
D. Connect the NPV devices to multiple upstream switches.
Selected Answer: D
Question #: 154
Topic #: 1
An engineer is converting a Cisco MDS switch to support NPIV mode.
What should be considered when implementing the solution?
A. It requires mapping of external interface traffic.
B. It must be enabled on VSAN 1 only.
C. It must be enabled globally on all VSANs.
D. It requires the FLOGI database to be disabled.
Selected Answer: C
Question #: 155
Topic #: 1
DRAG DROP –
An engineer must recover configuration on a Cisco MDS 9000 Series switch from a previous version that was backed up to bootflash and then verify the restoration.
Drag and drop the commands on the left to the correct order on the right.
Select and Place:
Suggestion Answer:
Question #: 156
Topic #: 1
Refer to the exhibit.
What is the result of implementing this configuration?
A. The Fibre Channel interface is configured for SPAN.
B. The Fibre Channel interface is configured for source distribution.
C. The Fibre Channel interface is configured for FSPF.
D. The Fibre Channel interface is configured for synchronization distribution.
Selected Answer: A
Question #: 157
Topic #: 1
DRAG DROP –
Drag and drop the characteristics from the left onto the NAS protocols on the right. Some characteristics are used more than once.
Select and Place:
Suggestion Answer:
Question #: 158
Topic #: 1
DRAG DROP –
Drag and drop the NAS features from the left onto the NAS descriptions on the right. Not all features are used.
Select and Place:
Suggestion Answer:
Question #: 159
Topic #: 1
DRAG DROP –
A storage engineer must configure zoning on a Cisco MDS 9000 Series switch. Drag and drop the actions from the left into the order on the right.
Select and Place:
Suggestion Answer:
Question #: 160
Topic #: 1
Which configuration statically assigns VSAN membership to a virtual Fibre Channel interface?
A. switch(config-vsan-db)# vsan 100 interface vfc 31
B. switch(config-vsan-db)# vsan 100 fc 3/1
C. switch(config-vsan-db)# vsan 100 bind interface fc 3/1
D. switch(config-vsan-db)# vsan 100 bind interface vfc 31
Selected Answer: A
Question #: 161
Topic #: 1
Refer to the exhibit. An engineer must configure FCoE on a Cisco Nexus switch. Which two command sets complete this configuration? (Choose two.)
A. vsan database vsan 10 interface vfc 10
B. interface vfc 10 bind interface ethernet 1/3 no shut
C. vsan database vsan 10 interface ethernet 1/3
D. interface vfc 10 bind interface fcoe-vfc 1/3 no shut
E. interface fcoe 10 bind interface ethernet 1/3 no shut
Selected Answer: AB
Question #: 162
Topic #: 1
Refer to the exhibit. An engineer is configuring a VSAN on the network. Which option must be selected to create the VSAN?
A. Common/Global
B. Fabric B
C. FC Zoning Enabled
D. Fabric A
Selected Answer: D
Question #: 163
Topic #: 1
An engineer is configuring a vHBA template in UCS Manager. The engineer needs to specify the logical addresses used by the vHBA and the path through which the SAN traffic flows. Which two resources must be specified in the vHBA template? (Choose two.)
A. MAC addresses
B. WWPN Pool
C. WWNN
D. Fabric ID
E. VLAN ID
Selected Answer: BD
Question #: 164
Topic #: 1
Refer to the exhibit. An engineer configures FCIP on a Cisco MDS 9000 Series switch. What is the result of implementing the configuration?
A. The switch attempts to make two TCP connections.
B. Compression is performed by using hardware.
C. Compression is performed by using software.
D. Mode2 is enabled by default.
Selected Answer: B
Question #: 165
Topic #: 1
The FCoE technology is used in a data center and the MDS switches are configured as Fibre Channel Forwarders. Which configuration should be applied to an
MDS switch in order to be used as the best switch to connect by the CNAs in the fabric?
A. fcoe fcf-priority 512
B. fcoe fcf-priority 0
C. no fcoe fcf-priority
D. fcoe fcf-priority 1024
Selected Answer: B
Question #: 166
Topic #: 1
Refer to the exhibit. An engineer implements SPAN configuration on an Nexus 5000 series switch. Which two commands are necessary to complete the SPAN session configuration?
A. Configure switchport speed 4000 under interface fc2/2.
B. Configure the switchport monitor under interface fc2/2.
C. Configure session type fc under monitor session 1.
D. Configure the switchport mode SD under interface fc2/1.
E. Configure the switchport mode SD under interface fc2/2.
Selected Answer: AE
Question #: 167
Topic #: 1
What is a recommended design choice in a topology for multipathing iSCSI traffic?
A. single initiator to dual targets
B. two NICs bonded together on the initiator
C. dual initiators to a single target with bonded interfaces
D. initiators and targets in separate subnets
Selected Answer: D
Question #: 168
Topic #: 1
Which two actions should be taken before an upgrade is started on a Cisco MDS switch? (Choose two.)
A. disable Cisco Fabric Services
B. check the impact of the upgrade using the show install all impact command
C. free up space on the USB3 device by deleting old Cisco NX-OS image files
D. make the primary supervisor the active supervisor
E. back up the configuration
Selected Answer: BE
Question #: 169
Topic #: 1
Which solution provides remote and direct file-level access to users and systems?
A. direct-attached storage
B. Fibre Channel over Ethernet
C. network-attached storage
D. storage area network
Selected Answer: C
Question #: 170
Topic #: 1
Which storage protocol reduces file locks by using leasing?
A. SMB
B. NFS 3
C. NFS 4
D. CIFS
Selected Answer: D
Question #: 171
Topic #: 1
Refer to the exhibit. An engineer must distribute all the host ports to use all eight configured FEX uplinks. The solution must minimize disruption if an uplink fails.
Which action accomplishes this objective?
A. Set the pinning max-links value to 8
B. Configure the eight uplinks in a port channel
C. Change the supported FEX type
D. Statically assign each host interface to a fabric uplink
Selected Answer: B
Question #: 172
Topic #: 1
An engineer must start a software upgrade on a Cisco Nexus 5000 Series Switch during a zone merge. What is the result of this action?
A. The upgrade stops
B. The zone merge pauses until the upgrade completes
C. The zone merge stops
D. The zone merge executes and then the upgrade completes
Selected Answer: A
Question #: 173
Topic #: 1
A network engineer needs to upgrade the EPLDs of the fabric modules for a Cisco MDS director-class switch. In which order are components reloaded during the process?
A. one fabric module at the time
B. all fabric modules followed by the entire switching platform
C. all fabric modules in parallel
D. one module and one supervisor at the time
Selected Answer: A
Question #: 174
Topic #: 1
What is a characteristic of EPLD updates on Cisco MDS 9000 Series Switches?
A. EPLD bundles are released separately from a Cisco MDS NX-OS release
B. EPLD packages update hardware functionality on a device
C. EPLD updates are nondisruptive to traffic flow
D. EPLD updates are installed only via the Cisco DCNM GUI
Selected Answer: B
Question #: 175
Topic #: 1
The EPLD update of the supervisor module has been scheduled for several Cisco MDS 9000 Series Switches. What will be the impact of the update?
A. All traffic is stopped for the duration of the EPLD update and the switch is rebooted after the upgrade is completed.
B. The redundant supervisor takes over while the EPLD update is in progress and the switch is rebooted after the upgrade is completed.
C. All control plane traffic is stopped for the duration of the EPLD update and the switch remains operational for the duration of the upgrade.
D. The redundant supervisor takes over while the EPLD update is in progress and there is no service disruption.
Selected Answer: A
Question #: 176
Topic #: 1
A network engineer configures a converged network adapter (CNA) and must associate a virtual Fibre Channel 7 interface to VSAN 7. The CNA is connected to the interface Eth1/7, and VLAN 700 is mapped to the VSAN. Which configuration must be applied to create the virtual Fibre Channel interface and associate it with the Ethernet physical interface?
A. switch(config)# interface vfc 7 switch(config-if)# bind interface ethernet 1/7
B. switch(config)# vlan 700 switch(config-vlan)# fcoe vsan 7
C. switch(config)# vsan database switch(config-vsan)# vsan 7 interface vfc 7
D. switch(config)# interface ethernet 1/7 switch(config-if)# vfc 7 attach vlan 1,700
Selected Answer: A
Question #: 177
Topic #: 1
A company is running a pair of Cisco Nexus 7706 Series Switches as part of a data center segment. All network engineers have restricted read-write access to the core switches. A network engineer must add a new FCoE VLAN to allow traffic from servers toward FCoE storage. Which set of actions must be taken to meet these requirements?
A. 1. Assign the network-admin role to a user. 2. Commit the role to the switch to the active user database.
B. 1. Modify a network-operator role and add the required privileges. 2. Assign a VDC-operator role to a user.
C. 1. Create a user-defined role and add the required privileges. 2. Assign a role to a user.
D. 1. Add the required privilege to the VDC-admin role. 2. Commit the changes to the active user database.
Selected Answer: C
Question #: 178
Topic #: 1
Which communication method does NFS use for requests between servers and clients?
A. SMB
B. RPC
C. SSC
D. XDR
Selected Answer: B
Question #: 179
Topic #: 1
What is an advantage of NFSv4 over Fibre Channel Protocol?
A. uses IP transport
B. congestion management
C. improved security
D. lossless throughput
Selected Answer: C
Question #: 180
Topic #: 1
A customer reports Fibre Channel login requests to a Cisco MDS 9000 Series Switch from an unauthorized source. The customer requires a feature that will allow all devices already logged in and learned to be added to the Fibre Channel active database. Which two features must be enabled to accomplish this goal?
(Choose two.)
A. auto-learning
B. smart aliases
C. port security
D. enhanced zoning
E. device aliases
Selected Answer: AC
